High Quality Factory Supply Agriculture Irrigation Motorized UPVC
Butterfly Valve Dn63
Product Description:
Agriculture Irrigation Motorized UPVC Butterfly Valve/IP67/Soft
Sealed
Description:
UPVC electric butterfly valve is suited to low pressure and room
temperature services
to switch, control, and cut off various strong corrosive fluid
mediums.
With lightweight and strong corrosion resistance, the body is
widely applied in the piping
system of pure water and raw drinking water, drainage and sewage,
brine and seawater,
acid-alkali and chemical solution.
| Power supply | AC220V |
| Valve size | DN50-300 |
| Medium Temp | -15ºC ~ 60ºC(no congelation) |
| Ambient Temp | -25ºC ~ 55ºC |
| Body ratings | 1.0Mpa |
| Action mode | Switch to cut off,0 ~ 90°gyration |
| Action time | 4 1530 60S |
| Protector | Overheat protection |
| Body connections | Wafer, flange |
| Body material | UPVC |
| Seal material | PTFEEPDM |
| Actuator material | Casting aluminum alloy |
| Applicable medium | Water, air, oil, corrosive chemical liquid |
| Protection level | IP67 |
| Installation mode | Install it in any angle(Prefer to horizontal or inclined
installation to extend service life.) |
Installation Diagram
Valve size mm | Size (mm) |
| Length | D | D1-ANSI | D1-JIS | D1-DIN | H | n-d-ANSI | n-d-JIS | n-d-DIN |
| 50 | 43 | 56.5 | 120.39 | 120 | 125 | 103 | 4-19 | 4-19 | 4-18 |
| 65 | 47.5 | 70 | 139.44 | 140 | 145 | 113 | 4-19 | 4-19 | 4-18 |
| 85 | 47.5 | 79 | 152.4 | 150 | 160 | 115 | 4-19 | 4-19 | 4-18 |
| 100 | 57.2 | 103 | 190.5 | 175 | 180 | 135 | 8-19 | 8-19 | 8-18 |
| 125 | 66 | 130 | 216 | 210 | 210 | 165 | 8-22 | 8-23 | 8-18 |
| 150 | 74 | 151 | 241.55 | 240 | 240 | 177 | 8-22 | 8-23 | 8-23 |
| 200 | 87.5 | 200 | 298.5 | 290 | 295 | 210 | 8-22 | 8-23 | 8-23 |
| 250 | 110 | 255 | 362 | 355 | 350 | 240 | 12-25 | 12-25 | 12-23 |
| 300 | 129 | 311 | 432 | 400 | 400 | 297 | 12-25 | 12-25 | 12-23 |
Note: Without standard accessories, above size is for references
only, please consult with our technology department for the latest
parameters due to product improvement and technology innovation.
Main properties specification
Valve size DN |
50-300(mm) |
Body ratings |
PN (Mpa) |
0.6 |
1.0 |
1.6 |
Test properties pressure |
Strength test |
0.9 |
1.5 |
2.4 |
Seal test |
0.66 |
1.1 |
1.76 |
Air seal test |
0.6 |
0.6 |
0.6 |
Control Diagram
Packing & Shipping:
1.Packing: inner with bubble wrap,outer with cardboard box and wooden case.
2.Transportation:by sea, by air,by train.
If you have other requirements, please feel free to tell us.
