UPVC Straight Through Type Electric Butterfly Valve for Irrigation
Product Description:
UPVC Electric Butterfly Valve for Irrigation/IP67/Fixed Ball Valve
Description:
UPVC electric butterfly valve is used to switch, control, and cut
off all kinds of fluid medium with strong
corrosive in the situation of low pressure and room temperature.
The body with lightweight and strong
corrosion resistance is widely applied in the piping system of pure
water and raw drinking water, drainage
and sewage, brine and seawater, acid-alkali and chemical solution.
| Power supply | AC220V |
| Nominal diameter | DN50-300 |
| Medium Temp | -15 Degree centigrade ~60 Degree centigrade (without congelation) |
| Ambient Temp | -25 Degree centigrade ~55 Degree centigrade |
| Nominal pressure | 1.0Mpa |
| Action mode | Switch to cut off, 0-90° Gyration |
| Action time | 4153060S |
| Protector | Overheat protection |
| Connection | Wafer, flange |
| Body material | UPVC |
| Sealed material | PTFEEPDM |
| Actuator material | Casting aluminum alloy |
| Applicable medium | Water, air, oil, corrosive chemical liquid |
| Protection level | IP67 |
| Installation mode | Install it in any angle(Prefer to horizontal or inclined
installation to extend the service life. ) |
Valve size mm | Size (mm) |
Length | D | D1-ANSI | D1-JIS | D1-DIN | H | n-d-ANSI | n-d-JIS | n-d-DIN |
50 | 43 | 56.5 | 120.39 | 120 | 125 | 103 | 4-19 | 4-19 | 4-18 |
65 | 47.5 | 70 | 139.44 | 140 | 145 | 113 | 4-19 | 4-19 | 4-18 |
85 | 47.5 | 79 | 152.4 | 150 | 160 | 115 | 4-19 | 4-19 | 4-18 |
100 | 57.2 | 103 | 190.5 | 175 | 180 | 135 | 8-19 | 8-19 | 8-18 |
125 | 66 | 130 | 216 | 210 | 210 | 165 | 8-22 | 8-23 | 8-18 |
150 | 74 | 151 | 241.55 | 240 | 240 | 177 | 8-22 | 8-23 | 8-23 |
200 | 87.5 | 200 | 298.5 | 290 | 295 | 210 | 8-22 | 8-23 | 8-23 |
250 | 110 | 255 | 362 | 355 | 350 | 240 | 12-25 | 12-25 | 12-23 |
300 | 129 | 311 | 432 | 400 | 400 | 297 | 12-25 | 12-25 | 12-23 |
Note: Without standard accessories, above size is for references
only, please consult with our technology
department for the latest parameters due to product improvement and
technology innovation.
Main properties specification
Valve size DN |
50-300(mm) |
Body ratings |
PN (Mpa) |
0.6 |
1.0 |
1.6 |
Test properties pressure |
Strength test |
0.9 |
1.5 |
2.4 |
Seal test |
0.66 |
1.1 |
1.76 |
Air seal test |
0.6 |
0.6 |
0.6 |
Control Diagram
Packing & Shipping:
1.Packing: inner with bubble wrap,outer with cardboard box and wooden case.
2.Transportation:by sea, by air,by train.
If you have other requirements, please feel free to tell us.
